Lemond g-force RT Bedienungsanleitung PDF herunterladen (Seite 15)

3 ASSEMBLY AND INSTALLATION INSTRUCTIONS

3.5.5 Seat

Attaching the Adjustment Handles to the Seat

Carrier

1. Locate the seat adjustment handles. They

can be found in the plastic bag contain

ing the tools and other hardware.

2. The shorter, L-shaped handle is attached

to the left side of the bike and controls

the seat angle adjustment. Slide the han

dle onto the post on the left side of the

seat carrier so that the set screws make

contact with the ﬂat portion of the post.

Tighten the (2) set screws at the top of

the handle with the 2.5 mm hex wrench.

3. The longer handle controls the fore/aft adjustment of the seat and is located on the right side of

the bike. Align the (2) holes of the handle with the (2) holes on the right side of the seat carrier.

Attach the handle with (2) M5x25 screws and tighten using the 3mm hex wrench.

Attaching the Handlebars to the Seat Assembly

Attach the handlebars to the seat assembly before

attaching the seat to the body of the bike.

1. Turn the seat assembly upside down so

that the seat rails and the seat back touch

the ﬂoor.

2. Insert the handlebars into the seat as

sembly with the holes on the handlebars

facing up and aligned with the holes on

the seat carrier.

3. Secure the handlebars to the seat assem

bly by sliding (4) star washers onto each

of the (4) M8x20 screws and tighten using

the 6mm hex wrench.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Keine Kommentare

Lemond g-force RT Bedienungsanleitung Seite 15