Lemond g-force RT Bedienungsanleitung PDF herunterladen (Seite 13)

3 ASSEMBLY AND INSTALLATION INSTRUCTIONS

3.5.3 Rear Stabilizer

1. Locate the rear stabilizer and the level-

ing feet.

2. Slide the rear stabilizer into place at the

rear of the body frame from the right

side and rotate until the set screw is

positioned in the alignment notch. As

with the front stabilizer, be careful not to

dislocate the plastic sleeve.

3. Align the holes for the attachment

screws on the body and the rear stabi

lizer. Secure the rear stabilizer by sliding

star washers onto each of (2) M8x30 screws and tighten with the 6mm hex wrench.

4. Attach the leveling foot to the rear stabilizer by screwing it into the underside of the rear

stabilizer. Assume at ﬁrst, that your ﬂoors are level and install each foot snugly against the rear

stabilizer.

3.5.4 Display Console

Attaching the Console Mast to the Bike

1. Before installing the console mast to the body,

locate the (2) wires at the top of the front tube on

the body. Feed the wires through the tubing and

out of the hole at the top of the console mast.

2. Insert the console mast into the front tubing of

the body, taking care to align the holes for the at

tachment screws of the mast with both the body

and the plastic sleeve.

3. Secure the console mast to the body by sliding

star washers onto each of (3) M8x20 screws and

tighten with the 6mm hex wrench.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Keine Kommentare

Lemond g-force RT Bedienungsanleitung Seite 13